Wall‑mount Doppler Ultrasonic Flowmete

Wall‑mount Doppler Ultrasonic Flowmete

This is a split‑structure Doppler ultrasonic flowmeter. It consists of an IP68 submersible transducer and a wall‑mount transmitter, interconnected by waterproof cable. Based on Doppler frequency‑shift principle, it directly measures flow velocity, water depth and water temperature. Volumetric flow and totalized flow are calculated by inputting channel cross‑section parameters.
Send Inquiry

Dalian Yheng Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of wall‑mount doppler ultrasonic flowmete in China. Welcome to buy high quality wall‑mount doppler ultrasonic flowmete in stock here from our factory. If you have any enquiry about customized service, please feel free to email us.

 

Technical Specifications

Item Specifications
Measuring Principle Ultrasonic Doppler frequency‑shift
Velocity Range 0.04 ~ 5.00 m/s (custom‑extended range available)
Velocity Resolution 1 mm/s
Velocity Accuracy ±2~4% of measured value
Water Depth 0.02 ~ 10.00 m; Resolution: 2 mm; Accuracy: ±0.5%
Water Temperature 0 ~ 60 ℃; Resolution: 0.1 ℃
Flow Measuring Range 10 L/s ~ 99999999 m³/h
Transducer Protection IP68
Power Supply 12 VDC, operating current 250 mA
Signal Output RS485 Modbus, 4‑20 mA, relay alarm
Standard Cable Length 10 m
Applicable pH 6‑8, non‑strong‑corrosive water
Straight‑run Requirement Upstream ≥20×channel width, downstream ≥5×channel width; minimum relaxed: upstream ≥5×, downstream ≥3× (measurement deviation will increase)

Features

  • Direct velocity measurement without weir‑flume Actual flow velocity is measured on‑site instead of deriving flow from water‑level formula. Suitable for irregular‑shape channels and retrofit projects of old drainage culverts. The liquid shall contain certain suspended solids or air bubbles for reliable detection.
  • Flexible split wall‑mount layout Transmitter can be wall‑installed on shore for convenient operation and reading. The submersible transducer shall be fully submerged with minimum 20 cm water depth above it, fixed on channel bottom or side‑wall via bracket or concrete base.
  • Multiple cross‑section calculation modes Built‑in calculation templates for rectangular, trapezoidal, circular, square and river‑shaped sections. Multi‑transducer configuration is supported for wide rivers to improve measuring accuracy.
  • Diversified power & signal interfaces Operates on 12 VDC DC power supply and compatible with solar‑powered systems. It provides RS485 Modbus output (velocity, instantaneous flow, total flow, water level, temperature), 4‑20 mA analog output (instantaneous flow), plus relay alarm for flow threshold and total‑volume trigger. It can connect with RTU and data‑acquisition software for remote monitoring.
  • Local LCD display & parameter protection On‑board LCD displays water level, instantaneous flow, accumulated volume, cross‑section area and water temperature. Password‑protected parameter locking avoids unintended field modification. Additional functions include small‑signal cut‑off and water‑level offset compensation.
Order Customization in Bulk Now!
Contact us now for bulk customization with unique design

Hot Tags: wall‑mount doppler ultrasonic flowmete, China wall‑mount doppler ultrasonic flowmete manufacturers, suppliers, factory, clamp on ultrasonic flow meter, Flanged end Ultrasonic Flow Meter, TDS 100P Portable Ultrasonic Flow Meter, TUF 2000F2 Integrated Type Ultrasonic Flow Meter, TUF 2000H Handheld Ultrasonic Flow Meter, ultrasonic flow measurement solution