How To Install Pressure & Temperature

Installation Location
It should be convenient for observation and maintenance, avoiding vibration, high temperature, or corrosive environments.

The installation point should accurately reflect the measured pressure, avoiding vortices, dead corners, or pulsating areas.

Installation Method
Vertical installation is recommended, with a tilt generally not exceeding 30°. The interface is usually M20×1.5 external thread, requiring a copper or PTFE sealing gasket.

Special Medium Handling
High-temperature medium (>60℃): Install a U-shaped condensing tube or radiator at the front end.

Corrosive medium: Install an isolation tank or use a corrosion-resistant pressure gauge.

Pulsating or impact pressure: Install a buffer or damper.

Auxiliary Configuration
To facilitate calibration and replacement, it is recommended to install a shut-off valve before the pressure gauge.